คุณสมบัติ
การประยุคใช้งาน
- ใช้ร่วมกับระบบปรับอากาศระบายอากาศ อาคาร,โรงงาน ,สนามบินม,สถานีรถไฟ,ห้างสรรพสินค้า,ออฟฟิต,ห้องเรียน และสถาที่สาธารณะอื่นๆ เพื่อคุณภาพที่ดีของอากาศ
- ใช้ในห้อง Lab,ที่เก็บสินค้า และอื่นๆ ที่ต้องการตรวจวัด CO2+Temp. +RH
Specifications
Carbon dioxide | |
Sensing element | Non-Dispersive Infrared Detector (NDIR) |
CO2 measuring range |
0~2000ppm (default) 0~5000ppm (selected in the advanced setup) |
CO2 Accuracy @22℃(72℉) |
±60ppm + 3% of reading or ±75ppm (whichever is greater)
|
Temperature dependence |
0.2% FS per℃ |
Stability | <2% of FS over life of sensor (15 year typical) |
Pressure dependence | 0.13% of reading per mm Hg |
Calibration | ABC Logic Self Calibration Algorithm |
Response time | < 2 minutes for 90 % step change typical |
Signal update | Every 2 seconds |
Warm-up time | 2 hours (first time) / 2 minutes (operation) |
Temperature and Humidity(option) | ||
Temperature sensor (selectable) | Digital integrated temperature and humidity sensor SHT, or NTC thermistor | |
Measuring range | -20~60℃/-4~140F (default) 0~100%RH | |
Accuracy | Temp.: <±0.5℃@25℃ RH: <±3.0%RH (20%~80%RH) |
General Data |
|||
Power supply | 24VAC/VDC± 10% | ||
Consumption |
1.8 W max. ; 1.2 W avg. | ||
Analog outputs |
One 0~10VDC/4~20mA for CO2 measurement Two 0~10VDC/4~20mA for CO2/Temperature measurements PID control output is selectable |
||
Relay output |
One passive relay output (max.5A) with the control mode selection (control a fan or a CO2 generator) |
||
RS485 interface |
Modbus protocol or BACnet protocol, 4800/9600(default)/19200/38400bps; 15KV antistatic protection, independent base address. |
||
LED light selectable |
|
||
Operation conditions | 0~50℃; 0~95%RH, non condensing | ||
Storage conditions | -10~60℃, 0~80%RH | ||
Net Weight / Dimensions |
190g /117mm(H)×95mm(W)×36mm(D) |
||
Installation | wall mounting with 65mm×65mm or 2”×4”wire box | ||
Housing and IP class | PC/ABS fireproof plastic material, protection class: IP30 | ||
Standard | CE-Approval |
Models Guide (โมเดล option ต่างๆภายในเครื่องสามารถเลือก pass number ได้ตามการใช้งาน)
TSP - CO2 - A X Y Z - T/TH - P
A: OLED display with buttons (เลือกมีหรือไม่มีหน้าจอ LCD และปุ่มปรับ)
D- with OLED and buttons (for Y=1)
B- no OLED and buttons
X: analog output (เลือก output ออกเป็น 3 รูปแบบ)
0- no analog output
1- 1x analog output (for CO2)
2- 2x analog output (for CO2 & Temp.)
Y: relay output (เลือก relay output)
0- no relay output
1- 1x relay output
Z: communication interface (เลือก PORT สื่อสารออกเป็น 3 รูปแบบ)
0- no communication interface
1- Modbus RS485 interface
2- BACnet protocol (will be soon)
T/TH: temperature and RH option
T- temperature detection
TH- temperature & RH detection
No T/TH suffix indicates no temperature or/and RH detection
P: type of analog output (เลือกรูปแบบสัญญาณ out put)
V- 0~10VDC output (default)
A- 4~20mA output
P- PID output
*** ทั้งนี้ราคาอุปกรณ์จะขึ้นอยู่ option buit in ภายในเครื่อง